Gigabyte GA-P55A-UD3P Realtek LAN Driver 6.227.0902.2009 for Vista

CPU   

1. Support for an Intel Core i7 series processor/Intel Core i5 series processor in the LGA1156 package

(Go to GIGABYTE's website for the latest CPU support list.)

2. L3 cache varies with CPU



Chipset   

1. Intel P55 Express Chipset



Memory   

1. 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory

2. Dual channel memory architecture

3. Support for DDR3 2200/1333/1066/800 MHz memory modules

4. Support for non-ECC memory modules

5. Support for Extreme Memory Profile (XMP) memory modules



Audio   

1. Realtek ALC889 codec

2. High Definition Audio

3. 2/4/5.1/7.1-channel

4. Support for Dolby Home Theater

5. Support for S/PDIF In/Out

6. Support for CD In



LAN   

1. 1 x RTL8111D chip (10/100/1000 Mbit)



Expansion Slots   

1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) (The PCIEX16 slot conforms to PCI Express 2.0 standard.)

2. 1 x PCI Express x16 slot, running at x4 (PCIEX4)

3. 2 x PCI Express x1 slots

4. 3 x PCI slots

* When set Turbo SATA3 / USB3.0 (Marvell 9128 /NEC USB 3.0 Controller) to enable in BIOS setup, 1st PCIex16 slot will run at x8 bandwidth and 2nd PCIex16 slot will be disabled.



Multi-Graphics Technology

1. Support for ATI CrossFireX technology



Storage Interface

Chipset:

1. 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices

2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10



Marvell 9128 chip:

1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA2_7) supporting up to 2 SATA 6Gb/s devices

2. Support for SATA RAID 0



JMB362 SATA2 chip:

1. 2 x eSATA 3Gb/s connectors on the back panel supporting up to 2 SATA 3Gb/s devices

2. Support for SATA RAID 0, RAID 1, and JBOD



iTE IT8213 chip:

1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices



iTE IT8720 chip:

1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive



USB

Chipset:

1. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)



NEC chip:

1. Up to 2 USB 3.0/2.0 ports on the back panel



Internal I/O Connectors   

1. 1 x 24-pin ATX main power connector

2. 1 x 8-pin ATX 12V power connector

3. 1 x floppy disk drive connector

4. 1 x IDE connector

5. 6 x SATA 3Gb/s connectors

6. 2 x SATA 6Gb/s connectors

7. 1 x CPU fan header

8. 2 x system fan headers

9. 1 x power fan header

10. 1 x front panel header

11. 1 x front panel audio header

12. 1 x CD In connector

13. 1 x S/PDIF In header

14. 1 x S/PDIF Out header

15. 2 x USB 2.0/1.1 headers

16. 1 x serial port header

17. 1 x parallel port header

18. 1 x clearing CMOS jumper



Back Panel Connectors

1. 1 x PS/2 keyboard or PS/2 mouse port

2. 1 x coaxial S/PDIF Out connector

3. 1 x optical S/PDIF Out connector

4. 8 x USB 2.0/1.1 ports

5. 2 x USB 3.0 ports

6. 2 x eSATA 3Gb/s ports

7. 1 x RJ-45 port

8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line)



I/O Controller   

1. iTE IT8720 chip



H/W Monitoring   

1. System voltage detection

2. CPU/System temperature detection

3. CPU/System/Power fan speed detection

4. CPU overheating warning

5. CPU/System/Power fan fail warning

6. CPU/System fan speed control



BIOS   

1. 2 x 16 Mbit flash

2. Use of licensed AWARD BIOS

3. Support for DualBIOS

4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b



Unique Features   

1. Support for @BIOS

2. Support for Q-Flash

3. Support for Xpress BIOS Rescue

4. Support for Download Center

5. Support for Xpress Install

6. Support for Xpress Recovery2

7. Support for EasyTune

8. Support for Dynamic Energy Saver 2

9. Support for Smart TPM

10. Support for Smart 6

11. Support for Auto Green

12. Support for eXtreme Hard Drive

13. Support for Q-Share



Bundle Software   

1. Norton Internet Security (OEM version)



Form Factor

1. ATX Form Factor; 30.5cm x 24.4cm







It is highly recommended to always use the most recent driver version available.



Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.



Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.